Keycap Usage Guide
Product Usage Guide
Thank you for choosing Urelab keycaps! Please follow the steps below to properly install and use your keycaps.
|
Step 1 — Preparation Before installation, make sure your keyboard is turned off or disconnected. Have a keycap puller ready. |
|
Step 2 — Remove Existing Keycaps Use the keycap puller to gently grip both sides of the keycap and pull straight up. Avoid twisting or rocking to prevent damage to the switches. |
|
Step 3 — Install New Keycaps Align the Urelab keycap with the cross-shaped stem of the switch and press straight down until you hear a satisfying click, confirming it is securely in place. |
|
Step 4 — Check & Adjust After installation, press each keycap individually to ensure all keycaps are firmly seated with no wobble or misalignment. |
Important Notes
These keycaps are compatible with MX-style switches. Please confirm your keyboard's switch type before purchasing.
For cleaning, use a dry or slightly damp cloth. Avoid chemical cleaners.
PBT material is resistant to wear and shine, but avoid prolonged exposure to direct sunlight or high temperatures.
Compatibility
Urelab keycaps support the following keyboard layouts: 61% array，75% array, 87% array, 98% array, 104% array, 108% array and Ansi Layout.
Contact Us
If you have any questions, please reach out to us via the contact page on our website. We're happy to help!